Hot Melt Waterproofing System

Rubberised Bitumen Versatility, simplicity and durability.

Hot Melt waterproofing systems were developed in America 40 years ago, and are now known and used worldwide because of their versatility, simplicity and durability.

Hot Melt rubberised systems are intended for buried applications such as podium decks, green roofs, car parks, inverted roofs, below ground work etc.
Correctly installed, they are designed to last the lifetime of the building and have therefore been used on many high profile construction projects throughout the UK.

Hot Melt systems comprise two layers of hot melt rubberised bitumen, 3mm thick, with reinforcement laid between the coats to provide improved tensile characteristics and access to lay the second coat. On flat areas, this is customarily a non-woven polyester fleece.

Protection sheets of reinforced bitumen membrane rolls are installed to suit the specific end use of the area, i.e. a roof barrier fitted prior to laying a green or garden roof or more robust bitumen membrane in the case of car parks etc. before the final surface finish is applied, i.e. casting a concrete car park slab etc.

The benefits of this system are:

a tough, self-sealing sysems which is flexible to most construction movement,
full bonding eliminating water tracking
lasts the lifetime of the building
Why not find out more about some of our other services? Insulation, lead flashings, gutter guards and leak detection.Contact Us

Why Choose Infallible Systems for your hot melt needs?

With a long history in the industry, we have a wealth of experience and knowledge within this sector. We only use highly skilled and experienced technicians and only use high quality sys-tems capable of lasting well in excess of 25 years.

For more information, contact Infallible Systems today. We are ready to take your call – whether you need advice, a quote or a full discussion about your roofing requirements.